Active Media Products Logo



menu-bar Home Products Where to Buy About Us Support Contact Us

Installation | SSD Advantages

IDE PATA ZIF Drive Cloning Adapter
The AUSB-IDE is a USB to ZIF adapter that was made for cloning the contents of an IDE ZIF drive onto a SaberTooth IDE ZIF SSD. It has a hi-speed USB 2.0 interface (cable not included) and a 40-pin IDE ZIF connector. Avoid the labor of re-installing your operating system, applications and copying all your data files onto your new ZIF SSD by simply cloning your old drive onto your new ZIF SSD using the AUSB-IDE adapter. Two ZIF cables are included, but USB cable and cloning software are not included.

- USB 2.0 interface through Mini USB port
- 40-pin ZIF connector for attaching ZIF HDD or SSD
- 40-pin IDE male header for attaching IDE HDD or SSD
- ZIF cable included
- Red power LED
Mini USB cable, IDE cable and cloning application software are NOT included
- 1-Year warranty

The AUSB-IDE is primarily intended for AMP's SaberTooth ZIF SSDs, including the SaberTooth Z, ZX, Z4, ZT and ZF models, but is compatible with any 40-pin IDE ZIF hard disk drive or SSD drive. The USB 2.0 connector is industry standard, allowing the adapter to plug into virtually any computer.



Signaling Parallel ATA / IDE
Connector 40-pin ZIF
Dimensions 2.8 x 2.3 x 1.0 x 0.2 inches (53 x 24 x 5 mm)

Ordering Information

AUSB-ZIF1 available on


Home | Products | Where to Buy | About Us | Support | Contact Us

Copyright © 2008-2011 Active Media Products, All rights reserved.